I removed the glass and the lens cover. Here is where the lens assembly sits when trying to park before giving me the error code. Does it belong all the way to the right or just a bit off this position?
The reason that I am thinking that the correct home is not at the end is due to the sound (it sounds different than the normal start up routine) and because the copier is a 120% to 70% model so the
home at 100% is likely not at the end of the travel which is what is shown in the picture.
IMG_0105a.jpg
The reason that I am thinking that the correct home is not at the end is due to the sound (it sounds different than the normal start up routine) and because the copier is a 120% to 70% model so the
home at 100% is likely not at the end of the travel which is what is shown in the picture.
IMG_0105a.jpg