500 results in 0.0943 seconds.
-
Bizhub C258 rainbow corner when using main scanner glass 11x17
So I have a unit that when you use the glass and copying/scanning 11x17 you get a rainbow added to the lower right corner. I have cleaned the glass inside... -
C3351
Hi,
Don't know the small models that well but had a new customer call that I serviced. Getting a fine line when copying or scanning using... -
C-454e, "original left on glass"...
I read all the other posts on this issue on this board, but none of them seem to address the initialization of those sensors under the glass? Went looking... -
MFC-L6900dw line when using ADF
No, it is not the slit glass! Yes the firmware is up to date. It only has a line when using the ADF and does not do it when placed on the glass. On the... -
Kyocera CS-508ci Vertical Black Lines(moving) When Scanned via ADF
Have a 508ci leaving black lines when scanning through the ADF. Slit glass is cleaned. Doesn't do it when copied via platen glass. As you can see the... -
Canon IR Adv 6565i DADF scan problem
Canon IR Adv 6565i DADF scans first side with toning background on operator side of the machine. Second side comes out clean. Problem only occurs when... -
Toner curve error ta 5053ci
I'm unable to perform the toner curve adjustment without error, either thru sim, or adj maint.
When done thru sim it errors s003, when done thru... -
Kyocera 4551ci Light copies off glass
Prints from PC and internal prints are fine. Prints off glass very light at a consistent light density (No wave or repetitive marks). I cleaned optics... -
Bizhub C458 ADF and flatbed copies not correct
I have a C458 that when scans/copies are done via ADF or the glass have a "tire" mark on the top of the page. This does not happen when printing.... -
Interesting stuff
We just installed few KM A3 machines(300i and C250i) 2 of them with dirty glasses on the bottom side, one dot was on slit glass and another on original... -
Kyocera Copystar CS 308ci black spots on page
Hi
I'm trying to help out a friend. They have a cs 308ci. The problem is that the black developer unit is getting hardened "ink" spots... -
tonerjockey started a topic HP laser jet enterprise MFP M527 adf copies are slightly reduced even after calibratiin HPHP laser jet enterprise MFP M527 adf copies are slightly reduced even after calibrati
Hello, good morning.
this machine has several CQ issues. the main one is the copies are reduced by 4 mm top to bottom but not side to side. so they... -
HP LJ E72525
Don't know the newer HP models.
Just sold this off lease machine and only has 5k on meter. The lead edge registration is off about 1/4"... -
fainted and blured copy
I have Canon ir 2520if that when it's copy from ADF it's fainted and blured, but when is scanned from glass everything is fine. I already changed ADF... -
lanier DD3334 doesnt make a new master, keeps printing and old one
Hi could you help me? when I try to make a new master it keeps printing and oldcopy we placed before, even when that page is not on the glass. every new...
