copyman
Owner / Technician
Last Activity: 7 hours ago
Joined: 09-06-2005
Location: South Jersey
-
Did you change developer reset chips when you changed the dev powder?... -
You didn't mention anything about a C164 code on your OP? There are some damn good techs on this forum but none are mind readers. Best of luckLeave a comment:
-
That's not an error. It's suppose to show you "check sum" when firmware is done downloading. Looks all good to me.Leave a comment:
-
C658 DV unit ?
I see there are different part #'s for the C658 & the C368 developer units. But on some websites it shows the C658 dev unit part # same as the C368.... -
Leave a comment:
-
I had the same issue and it happen to be a C360i. It was working fine until I updated firmware and when rebooted it stuck at 50%. After trying suggestions...Leave a comment:
-
Thanks. Thought I saw that posted on this forum before but when I looked at C361i series data sheet it shows the FS533 (see attached). Maybe that is old...Leave a comment:
-
Not sure what you posting? We know the C450i, 550i use the MK-607?
Just to be clear you are saying the new 1i series will not use the FS533?...Leave a comment:
-
What about the blue lines of shame? When ever I use reset tool I always have to do initial machine setup because of blue lines. Especially the date &...Last edited by copyman; 1 week ago.Leave a comment:
-
When I finally installed the fan like king posted it was straight forward. I just followed the FS533 instructions for the specific model....Last edited by copyman; 1 week ago.Leave a comment:
-
I don't recall seeing that offsetting bulletin on this side of the pond. The settings are worth a try. Thanks...Leave a comment:
-
Not sure what more can be added that will help you. You have been given good advice. REPLACE THE IU's !!!Leave a comment:
-
Ouch!...Leave a comment:
-
Am I hearing this right, it may be necessary to replace 2 clutches on a brand new machine? How can Kon/Min expect dealers to keep selling their inferior...Leave a comment:
-
I thought the firmware had all languages and you select the language on copier?...Leave a comment:
-
No problem. You can PM me and will provide all common passwords or send you SM which I think you should have regardless. Don't want to post passwords...Leave a comment:
-
Agree with others about air ducts. Especially with 1 million clicks. I see you use original toner but what about the other consumables, were they all...Leave a comment:
-
Thanks Zig. I have the reset firmware...Leave a comment:
-
C224e internal error and codes C-D363 & C-D390
I know these are Nonvolatile data errors which I've never seen on the 4 series. I followed the procedure in service manual & a bulletin for the D363.... -
Glad you got it working.
Both my knees have bumps from kneeling on them for 40+ years working on copiers. I looked it up and it's called...Leave a comment:
No activity results to display
Leave a comment: