[Electrical] ir 5050 getting a E-500 ff21

[John Maxwell]

I have replaced the conrtol board on the finisher and check door switches and connections the machine will work for a while then it happens.

[charm5496]

Re: ir 5050 getting a E-500 ff21

I have replaced the conrtol board on the finisher and check door switches and connections the machine will work for a while then it happens.

This is a motor issue in one of your trays or something is causing one of the trays to bind as it is trying to move up and down. The part number for the motors are 4K1-1102-000. Item number 20

NCF000329000_Figure%20L15-1.jpg