Canon C3200 - E748-1001

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kuby
    Senior Tech

    1,000+ Posts
    • Oct 2007
    • 1405
    #1

    Canon C3200 - E748-1001

    Man the C3200 series are killing me this week, what are they communicating with each other? E748-1001 on a Canon C3200. Do not find this error in the manual. I think it has to do with something on the controller assembly, but what? Tried reseating all the boards and still the error comes up.

    Thanks
    Tags: 100, 200, assembly, c320, c3200, canon, controller, error, manual, roller
    • kuby
      Senior Tech

      1,000+ Posts
      • Oct 2007
      • 1405
      #2
      Re: Canon C3200 - E748-1001

      Found a bad stick of memory.....hope that is the problem.

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: Canon C3200 - E748-1001

          Originally posted by kuby
          Found a bad stick of memory.....hope that is the problem.

          E748 is usually Memory Issue /one or both

          OR-
          E748-1001
          When the wrong controller board is placed in the Color imageRUNNER C3200 and it has 1GB SDRAM installed on it, the operation is not guaranteed, so a new error code of E748-1001 is displayed.

          iR3200 USES A 512 and a 256 only=758

          iR3220 will accept two 512= 1024
          Last edited by teckat; 08-27-2011, 07:20 PM.
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...