Finisher-AF1 /Saddle Finisher-AF2---Preventing Stack Misalignment While Stapling
When stapling between 70 and 100 sheets of LTR size paper, the 4th page of the 3rd and subsequent sets may protrude beyond the stack (feed direction) resulting in an error in stack alignment .
This phenomenon may be caused by an error in FIN_CON version 16.03.
If the above symptom occurs, check the FIN_CON version by printing a P-PRINT or checking service mode under COPIER>DISPLAY>VERSION>SORTER.
If the software version displayed is v16.03 or below, please upgrade to software version v17.04 or greater.
FIN_CON v17.04 is included in System Software package 49.01c.
Additional information regarding FIN_CON v17.04 and System Software for imagePRESS 1110S/ 1110P/ 1125/ 1135v49.01c can be found in TP11 165c.
see pdf's>>
-Finisher-AF1_Saddle Finisher-AF2_TP11.pdf
TP11 165c._TP11-1.pdf
When stapling between 70 and 100 sheets of LTR size paper, the 4th page of the 3rd and subsequent sets may protrude beyond the stack (feed direction) resulting in an error in stack alignment .
This phenomenon may be caused by an error in FIN_CON version 16.03.
If the above symptom occurs, check the FIN_CON version by printing a P-PRINT or checking service mode under COPIER>DISPLAY>VERSION>SORTER.
If the software version displayed is v16.03 or below, please upgrade to software version v17.04 or greater.
FIN_CON v17.04 is included in System Software package 49.01c.
Additional information regarding FIN_CON v17.04 and System Software for imagePRESS 1110S/ 1110P/ 1125/ 1135v49.01c can be found in TP11 165c.
see pdf's>>
-Finisher-AF1_Saddle Finisher-AF2_TP11.pdfTP11 165c._TP11-1.pdf
Comment