drum unit replacement on Canon NP6016

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • krm
    Trusted Tech

    100+ Posts
    • Aug 2009
    • 233
    #1

    drum unit replacement on Canon NP6016

    Hi,
    Client got this machine donated to them. I am Muratec/Konica-Minolta dealer primarily. The drum is worn out and they asked me to install it. Are there any counters to reset or simulations to run? If so, I would appreciate them.
    Thank you.
    Tags: canon, cloth, counters, drum, konica, minolta, muratec, replacement, reset, unit
    • Simons
      Trusted Tech
      • Jun 2008
      • 490
      #2
      Re: drum unit replacement on Canon NP6016

      9-17-2011 11-09-39 PM.jpgYes there are two settings that need to be changed in Service mode . The primary and offset value. To match the drum value. Otherwise your new drum may give poor quality or not last as long as it should.

      I am in a world search for a NP 6016 Developer that has a good mag roller. check this to see if its worth going forward. PLus Ill give you a good price for your used developer if its in decent shape. Image looks like crap. PM me your email and ill send it.
      Attached Files

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: drum unit replacement on Canon NP6016

          I used to use BRASSO to clean those NP dev.rollers with some success/ perks up the CQ.
          Remove roller>wipe off with small amt. alcohol/wipe BRASSO straight across roller>polish good>clean off with a damp cloth> let dry>wipe clean again


          Formular has changed over the years
          Brasso - Wikipedia, the free encyclopedia
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: drum unit replacement on Canon NP6016

              Originally posted by krm
              Hi,
              Client got this machine donated to them. I am Muratec/Konica-Minolta dealer primarily. The drum is worn out and they asked me to install it. Are there any counters to reset or simulations to run? If so, I would appreciate them.
              Thank you.

              check your PM (Private Message)
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • Simons
                  Trusted Tech
                  • Jun 2008
                  • 490
                  #5
                  Re: drum unit replacement on Canon NP6016

                  This wont work in my case. Blade has messed up and is digging into the roller. Causing a large light area.
                  Originally posted by teckat
                  I used to use BRASSO to clean those NP dev.rollers with some success/ perks up the CQ.
                  Remove roller>wipe off with small amt. alcohol/wipe BRASSO straight across roller>polish good>clean off with a damp cloth> let dry>wipe clean again


                  Formular has changed over the years
                  Brasso - Wikipedia, the free encyclopedia

                    Comment

                    Previous template Next
                    Working...