compatible part with ir7095

[spectraindo]

Re: compatible part with ir7095

So far so good, the Bulk Toner costs only 1/3 of the genuine Toner, this make real money.

[teckat]

Re: compatible part with ir7095

GasMaskHazardous.jpg be my guest

[jiongpao]

Re: compatible part with ir7095

Toner Cartridge is different from iR105, but the Toner Powder itself is compatible.

I dont get what u mean Spectraindo. You mean the toner tube cannot fit in the machine but the powder inside is compatible to ir7095 ?

[spectraindo]

Re: compatible part with ir7095

Yes ,the Toner Tube for the iR105 will not fit the iR7105.
The Toner Tube for iR7105 is similar to iR5570 but the Toner is different then iR5570.

[jiongpao]

Re: compatible part with ir7095

Thanks you spectraindo this make me clear

[charm5496]

Re: compatible part with ir7095

Teckat, in our country Canon-Japan is supplying the photocopy industry with BULK TONER.
It came in 10 Kilograms boxes and it can be used on the NP6050 series,iR330-400,iR2200-3300,iR3570-4570 and iR5000 series.
Other manufacturers also make BULK TONER for the iR550-600,7200-8500-105 which is also compatible with iR7095-7105.
These Toners are supplied as is with no warranty, so we have to figure it out ourselves which one is the best .

No thank you!!! Who is responsible for storage of this bulk toner and how do you get into the tubes so you can place it in the machines? I would not want to breathe any of the toner dust at all. My health is worth a lot more than the few extra pennies you are making!!!!

long term problems on the machines are not worth it either. Shortened part life, broken parts, poor image quality, increased service calls and fewer CBC's. This means your machine will be down longer due to the fact that it needs more repair because of the toner. If you can't use the machine you aren't making any money!!!

[spectraindo]

Re: compatible part with ir7095

In mayor cities there are Toner Refilling facilities using modern machines, we do not have to refill the toner ourself !
And besides we tested the toner in our workshop for one month before we use on our customers machines.
It's real business, the copier market absorb approx 30 tons of toner each month.

[jiongpao]

Re: compatible part with ir7095

No thank you!!! Who is responsible for storage of this bulk toner and how do you get into the tubes so you can place it in the machines? I would not want to breathe any of the toner dust at all. My health is worth a lot more than the few extra pennies you are making!!!!

long term problems on the machines are not worth it either. Shortened part life, broken parts, poor image quality, increased service calls and fewer CBC's. This means your machine will be down longer due to the fact that it needs more repair because of the toner. If you can't use the machine you aren't making any money!!!

I personal agree with this genuine toner really bring less problem on machine !!!

[creppy]

Re: compatible part with ir7095

In mayor cities there are Toner Refilling facilities using modern machines, we do not have to refill the toner ourself !
And besides we tested the toner in our workshop for one month before we use on our customers machines.
It's real business, the copier market absorb approx 30 tons of toner each month.

Pak apa jual juga toner untuk ir7105 karna pake toner sa**fi*** hasilnya cuma bayang aja. trima kasih

[teckat]

Re: compatible part with ir7095

Pak apa jual juga toner untuk ir7105 karna pake toner sa**fi*** hasilnya cuma bayang aja. trima kasih

mind-reader real.jpgsemua topi tahu Dijual

[spectraindo]

Re: compatible part with ir7095

Haha Teckat ,I see your bahasa Indonesia is very poor, you should attend a 14 day course of bahasa Indonesia with President Obama.

[teckat]

Re: compatible part with ir7095

Haha Teckat ,I see your bahasa Indonesia is very poor, you should attend a 14 day course of bahasa Indonesia with President Obama.

saya berjalan di belakang pria tidak

Magneto.jpg

[kingpd@businessprints.net]

Re: compatible part with ir7095

Interesting. What part number of Kyocera?

usually get around 100K or more depending on the stock when using the OEM roller.
I personally use a kyocera roller that I cut in half and those get me around 300 - 400K

[creppy]

Re: compatible part with ir7095

saya berjalan di belakang pria tidak

[ATTACH=CONFIG]13188[/ATTACH]

hahahah very funny, nice to meet you teckat, is that you?

[teckat]

Re: compatible part with ir7095

hahahah very funny, nice to meet you teckat, is that you?

still waiting for my movie royalties from X-MEN