solution // Problem in high temperature ir 5000

[bluesky2000]

there is no error code or any thing in screen

look my problem is :

When printing large quantities of paper
When the paper out adjacent to each other and the paper will be very hot

This is the problem I thought that there is a way to reduce the temperature

solution


I posted some SERVICE MODE adjustments

Setting in service mode

[9] Wait time reduction mode- to reduce print time; for iR5000, 4 min or less; for iR6000, 1 min or less.
[10] Priority on fixing mode-
[11] Priority on productivity mode-
[12] Thick paper mode (120/230-V model only)-
[13] Special paper mode -

COPIER>OPTION>BODY>FIX-TEMP
Use it to select down sequence mode.
0: OFF, 12: priority on productivity while controlling down
sequence temperature to

CHECK
Heat discharge fan (FM3)
Exhaust (lower rear)

this solution with help from teckat

[jiongpao]

Re: solution // Problem in high temperature ir 5000

Thank for the information ! i got 1 unit of ir5000 oftenly come out with error code of e002 even after change thermistor. Then we got no choice just to off for 30mins and continue to hardcore again after that. This solution will solve my problem by lowering the temp and checking/cleaning the following fan and the air flow section.