Problem on ir2525i, power off during firmware update

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • veleno
    • Jul 2025
    #1

    [Electrical] Problem on ir2525i, power off during firmware update

    Hi I have a problem in ir2525i.
    I made a distraction during the firmware update going to accidentally turn off the power.
    Turning the machine on display is turned off and you hear no noise at startup.
    I changed the main controller, but no results, what may have been damaged?
    Regards Daniel ITALY
    Tags: controller, display, firmware, firmware update, locked up, main, power, roller, startup, update
    • vigour
      Service Manager

      1,000+ Posts
      • Aug 2010
      • 1038
      #2
      Re: Problem on ir2525i, power off during firmware update

      bad mistake
      i think you need a new boot rom

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: Problem on ir2525i, power off during firmware update

          Originally posted by veleno
          Hi I have a problem in ir2525i.
          I made a distraction during the firmware update going to accidentally turn off the power.
          Turning the machine on display is turned off and you hear no noise at startup.
          I changed the main controller, but no results, what may have been damaged?
          Regards Daniel ITALY

          is your CIS unit locked up ???

          RCON clear
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...