If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Could Somebody help me to remover E100 error code in Canon IR1022A ?
Thanks.
Yvon
Check for condensation on the BD sensor /could cause problems associated with E100
Check the connector of the BD detection PCB.
- Replace the laser scanner unit.
- Replace the DC controller PCB.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Check for condensation on the BD sensor /could cause problems associated with E100
Check the connector of the BD detection PCB.
- Replace the laser scanner unit.
- Replace the DC controller PCB.
diyan pala yun? hindi ba fusing unit ass'y? yung error,
Comment