Convert Fiery Z20 to Fiery Z40e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • electron2001
    Technician
    • Oct 2011
    • 19
    #1

    Convert Fiery Z20 to Fiery Z40e

    Hi, I have seen the FieryZ40e and the Fiery Z20 have the same hardware just the software is different, I install the Z20 with the Z40's backup, the installation finished successfully and an error message "license invalid ", I assume that the BIOS must be reprogrammed. Please help ...
    Tags: bios, convert, error, fiery, install, installation, invalid, message, software, stall
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      Re: Convert Fiery Z20 to Fiery Z40e

      you would be correct. Those went on two different style CLC models that had different interface PCB's
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083
          #3
          Re: Convert Fiery Z20 to Fiery Z40e

          Originally posted by electron2001
          Hi, I have seen the FieryZ40e and the Fiery Z20 have the same hardware just the software is different, I install the Z20 with the Z40's backup, the installation finished successfully and an error message "license invalid ", I assume that the BIOS must be reprogrammed. Please help ...
          bobodoll.jpgLive and Learn the Hard Way
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            Previous template Next
            Working...