IRA 7055

[TEC DOG]

After replacing fixing film,I'm going to clear error but canon smart engineers put clear dcon button next to clear error button so I don't have
p-print.Now i have displacement colours and pure print.What happened If i made COPIER>FUNCTION>SYSTEM>RSRAMBUP.Is this backup for
restore settings before clearing or earlier or what.Thanks a lot.

[teckat]

Re: IRA 7055

After replacing fixing film,I'm going to clear error but canon smart engineers put clear dcon button next to clear error button so I don't have
p-print.Now i have displacement colours and pure print.What happened If i made COPIER>FUNCTION>SYSTEM>RSRAMBUP.Is this backup for
restore settings before clearing or earlier or what.Thanks a lot.

LEVEL 2

RSRAMBUP =Backup of■Reader■Controller■PCB■SRAM
During■operation,■the■setting■data■changes■by■manu al■or■automatic■
adjustment.■When■backup■data■which■has■been■left■f or■a■long■period■
of■time■is■restored,■it■is■overwritten■by■the■old■ setting■data■and■the■
new■data■is■deleted

RSRAMRES - Restore■of■Reader■Controller■PCB■SRAM
To■restore■the■setting■data■which■has■been■backed■ up■in■SRAM■of■
the■Reader■Controller■PCB.



DSRAMRES = Restore■of■DC■Controller■PCB■SRAM
To■restore■the■setting■data■which■has■been■backed■up■in■SRAM ■of■
the■DC■Controller■PCB.

DSRAMBUP =Backup■of■DC■Controller■PCB■SRAMTo■back■up■the■setting■data■in■SRAM■of■the■DC■Controller■PCB

[TEC DOG]

Re: IRA 7055

I didn't made a backup before.What eksactly need to do,to get previous quality of print please.Thanks.

[teckat]

Re: IRA 7055

I didn't made a backup before.What eksactly need to do,to get previous quality of print please.Thanks.

Hopefully u Did Not / or Have Not powered of the printer yet after that DCON clear ???

did u try----
1)■Execute■the■ITB■neutral■position■adjustment.
Service■Mode■>■COPIER■>■FUNCTION■>■INSTALL■>■INIT-ITB
2)■Execute■the■color■displacement■correction.
[Settings/Registration]■>■[Adjustment■/Maintenance]■>■[Adjust■Image■Quality]■>■[Auto■Correct■
Color■Mismatch]■>■[Start]

Auto Correct Color Mismatch, select Settings and Registration > Adjustments >Maintenance > Adjust Image Quality > Auto Correct Color Mismatch. ????

&
■Select■[Settings/Registration]■>■[Adjustment■/Maintenance]■>■[Adjust■Image■Quality]■>■[Auto■Adjust■Gradation]■>■[Plain]■>■[Full■Adjustment].
■Select■the■source■of■paper■for■test■print,■and■pr ess■[OK].
■From■this■point■on,■follow■the■instruction■o n■UI.



did u check L2 Restore to see if there is a backup ?

[vigour]

Re: IRA 7055

you also need to go to copier>adjust and enter the specs from the label on the door.

[TEC DOG]

Re: IRA 7055

you also need to go to copier>adjust and enter the specs from the label on the door.

I do this first but it's not enough on this machine.I solve the problem with (COPIER > FUNCTION > LASER > LD-ADJ-Y/M/C) and

lev.2 COPIER> FUNCTION> MISC-P>AT-IMG-X

only after that i can do(Maintenance> Adjust Image Quality> Auto Correct Color Mismatch and calibration.Before this settings always get
error occurred in the middle of operation.

Thanks again Vigour and Teckat for support.

[teckat]

Re: IRA 7055

I do this first but it's not enough on this machine.I solve the problem with (COPIER > FUNCTION > LASER > LD-ADJ-Y/M/C) and

lev.2 COPIER> FUNCTION> MISC-P>AT-IMG-X

only after that i can do(Maintenance> Adjust Image Quality> Auto Correct Color Mismatch and calibration.Before this settings always get
error occurred in the middle of operation.

Thanks again Vigour and Teckat for support.

Thanks,& good luck

Bright idea.jpg
don't forget to store your Backups for Reader & DC
& Print out a few copies of P PRINTS > Keep with Printer & Customer