Canon IR 6317 - Jam?

[Smiley27]

Hello folks,I v got problem with this machine, wanted to record a video to show you but my camera is broken..So I am going to describe it to you

~ I plug in power cable, machine warms up,optic unit gets in its position,thats all fine,machine warms up,but when i press start button,scanner lamp goes to half of A4 paper,so like 110 CM from its original position and it gives me jam paper error...paper jams at the place where it pulls paper from drawer, so i wonder,is there any way to check for error code or something,

I dont know if i should concentrate my search on drawing unit,or its about laser and optics ...


thanks in advance

[ernesto]

Re: Canon IR 6317 - Jam?

Hello folks,I v got problem with this machine, wanted to record a video to show you but my camera is broken..So I am going to describe it to you

~ I plug in power cable, machine warms up,optic unit gets in its position,thats all fine,machine warms up,but when i press start button,scanner lamp goes to half of A4 paper,so like 110 CM from its original position and it gives me jam paper error...paper jams at the place where it pulls paper from drawer, so i wonder,is there any way to check for error code or something,

I dont know if i should concentrate my search on drawing unit,or its about laser and optics ...


thanks in advance

[zoraldinho]

Re: Canon IR 6317 - Jam?

Probably is paper jam the reason for scanner lamp stops.What do you done already?


1.Check the paper holddown
tabs.

2.Check the strength of
the paper-lifting
springs.

1.Change the copy paper.

2.Instruct the user about
the correct method of
storing paper.

Replace the pick-up rollers.

Replace the pre-registration
paper sensor (Q2).

1.Check each feed roller
for wear and deformation.

2.Check the paper guide
plate for burrs or deformation.

Check the registration
roller clutch

Are the registration rollers worn, deformed,
or dirty?If they are dirty, clean
them with alcohol. If
they are deformed.

[Smiley27]

Re: Canon IR 6317 - Jam?

Iv found a problem,it was simple,guy who was removing jam,pulled it back,towards him self,and made sensor get stuck in 90 degrese position towards plastic cover,that blocked path for paper...



thank you guys for your time



SOLVED

[zoraldinho]

Re: Canon IR 6317 - Jam?

images - Copy.jpg