ir6000i "mail box"

[br21]

hi!
i really need help!
i bought used ir6000i and after powering up i've got "mail box" screen...
like this:

i would like to have normal copying screen...
when i want to change initial function i have no choice:


what to do?!
thanx for help!
regards
bartek

[Copier_Guy]

I know this is going to sound vague, but there is a way to do this. I don't have a machine in front of me, but I can guide you in the right direction.

First select all the initial settings you want to show up when machine is powered up. (Copy Screen, 1 copy selected...etc.)

Then you have to go into " * Additional Functions " and select "Common Settings". Scroll down until you see "Initial Settings".

I believe there is a selection there to "Save Settings". Hit save and the machine will save what you setup as the initial screen. I hope this takes you in the right direction and helps to solve your problem.

Let us know how you made out.

[br21]

thanx for your reply!
the main problem is i don't know where to set those initial settings (copy screen), as it is shown in second picture of my previous post i have no choice there - i've got only "mail box" button there

[Copier_Guy]

Is what you're telling me is that you can't select copy functions at all? While you're in the mailBox screen, you can't close that screen and select copy or scanner?

[br21]

Is what you're telling me is that you can't select copy functions at all? While you're in the mailBox screen, you can't close that screen and select copy or scanner?

exactly!

[11x17]

quite possibly it is not recognizing the reader. I dont know if you can get it without a reader. If it definitely has a reader than make sure all cables and connections are tight. Let us know

[Copier_Guy]

If what 11X17 doesn't do it, you'll need to call a service person to either Clear the NVRAM on certain areas of the machine or reload the system software.