ir2525 101 counter

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • KM7155
    Trusted Tech
    • Aug 2008
    • 145
    #1

    ir2525 101 counter

    Hi guys,
    anyone can guide me how to enable the total count (101) counter in the ir2525 screen.
    now, when i press the counter button, it just show 102,113,301 and 501 counter.
    i need the 101 counter.

    thanks in advance.
    Tags: 101, 301, button, count, counter, guide, press, screen, show, total
    • nasertop
      Technician
      • Aug 2011
      • 40
      #2
      Re: ir2525 101 counter

      try the following - enter service mode select numeric parameter by using arrow keys. press ok. now select 056 by using arrow keys. then press ok. now counter 101 will be on display.

        Comment

        • KM7155
          Trusted Tech
          • Aug 2008
          • 145
          #3
          Re: ir2525 101 counter

          Originally posted by nasertop
          try the following - enter service mode select numeric parameter by using arrow keys. press ok. now select 056 by using arrow keys. then press ok. now counter 101 will be on display.
          thanks a lot. will try it out.

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: ir2525 101 counter

              Originally posted by KM7155
              Hi guys,
              anyone can guide me how to enable the total count (101) counter in the ir2525 screen.
              now, when i press the counter button, it just show 102,113,301 and 501 counter.
              i need the 101 counter.

              thanks in advance.
              it should not be missing

              101 is always displayed/software counter 1 of the control panel. This type of soft
              counter 1 cannot be changed.

              should be six counters listed for use ?? #2>6 can be changed.

              To configure the Soft Counters go to Service Mode>#Numeric and change the values for 057 through 061. The Soft Counter 1 is fixed to Counter 101.

              057 - Soft Counter 2
              058 - Soft Counter 3
              059 - Soft Counter 4
              060 - Soft Counter 5
              061 - Soft Counter 6
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • iRC
                  Summer trainee!

                  50+ Posts
                  • Apr 2010
                  • 96
                  #5
                  Re: ir2525 101 counter

                  Originally posted by teckat
                  it should not be missing

                  101 is always displayed/software counter 1 of the control panel. This type of soft
                  counter 1 cannot be changed.

                  should be six counters listed for use ?? #2>6 can be changed.

                  To configure the Soft Counters go to Service Mode>#Numeric and change the values for 057 through 061. The Soft Counter 1 is fixed to Counter 101.

                  057 - Soft Counter 2
                  058 - Soft Counter 3
                  059 - Soft Counter 4
                  060 - Soft Counter 5
                  061 - Soft Counter 6
                  I've noticed that almost all new Canon models come with 101 -counter hidden. That's quite odd, since it's probably the most needed counter. But I always just add it to the 7th. counter slot.
                  Last model range which I saw that the 101 -counter was visible straight from the factory was the iRC2380-3580 -series.

                    Comment

                    Previous template Next
                    Working...