Canon IR3300 Network Help

[century]

Hi everyone,
I have a little problem about network that I never met before. I try to set up a network for IR3300. I input a IP said 192.168.1.149 after I turn off and on then the IP change to 192.168.1.111
I try several time and it still change my IP. Would anyone tell me why it does that? Thanks

[11x17]

Is DHCP enabled? If so it will pull a different IP every time you power cycle

[century]

Is DHCP enabled? If so it will pull a different IP every time you power cycle

The problem is solved. Thanks 11X17

[11x17]

I'm glad you got it fixed but it would be nice if you would post the solution since you asked the question. It is common courtesy to the people that took the time to help you to also know the solution to the problem that you posted

[century]

I'm glad you got it fixed but it would be nice if you would post the solution since you asked the question. It is common courtesy to the people that took the time to help you to also know the solution to the problem that you posted

Sorry, I assume everyone will understand the problem solved is because the DHCP was enable like you said. I just unable the DHCP and it's work. The IP is not change anymore.
I really appreciated everyone who spend time to help another in this forum.
Thanks again 11X17

[fr2au]

Hi everyone,
I have a little problem about network that I never met before. I try to set up a network for IR3300. I input a IP said 192.168.1.149 after I turn off and on then the IP change to 192.168.1.111
I try several time and it still change my IP. Would anyone tell me why it does that? Thanks

After changing the IP address you need to turn off the DHCP

[century]

After changing the IP address you need to turn off the DHCP

Yes, I already turn it off and it work fine. Thanks