[Misc] Finisher W-1 with broken flag for tray C

[megtech]

I have an IR-C4080i with finisher issues. One of the sensor flags for tray C on the bottom is broken. I have attached a picture for reference. I do not have a means to verify the part number for this flag. I assume it is replaceable.

Any assistance with the part number for this broken image would be appreciated.C4080iflagbroke.jpg

[charm5496]

Re: Finisher W-1 with broken flag for tray C

looks like that is your lever paper sensor arm - 4A3-1673-000. See attached page
NCF000201000_Figure L10-1-100.pdf

[megtech]

Re: Finisher W-1 with broken flag for tray C

Thanks~

[teckat]

Re: Finisher W-1 with broken flag for tray C

looks like that is your lever paper sensor arm - 4A3-1673-000. See attached page
[ATTACH]12779[/ATTACH]

perfect observation / replaced many of those

flag.JPG

[charm5496]

Re: Finisher W-1 with broken flag for tray C

Thanks~

you are welcome!