know solving a error code

[zoraldinho]

Re: know solving a error code

hiii.very very tank u.can i found an error history?a list of previous errors of my meshine.that contain all of errors'solved or not solved.

Capture_057.jpg

[dr.mansoor]

Re: know solving a error code

Are u a tech ??? ** be careful what u touch in service mode/ it can make your machine inoperable to use [ATTACH=CONFIG]13034[/ATTACH][ATTACH=CONFIG]13035[/ATTACH][ATTACH=CONFIG]13036[/ATTACH]

hiii.very very tank u.can i found an error history?a list of previous errors of my meshine.that contain all of errors'solved or not solved.

[teckat]

Re: know solving a error code

COPIER>FUNCTION>CLEAR>ERR). were is this pathway?in setting in my meshine?pls tell me step by step.tanks

Are u a tech ???

**


be careful what u touch in service mode/ it can make your machine inoperable to use
SM.JPGSM1.JPGSM2.JPG

[zoraldinho]

Re: know solving a error code

COPIER>FUNCTION>CLEAR>ERR). were is this pathway?in setting in my meshine?pls tell me step by step.tanks

add func.jpg.....28At the same time.......add func.jpgCOPIER>FUNCTION>CLEAR>ERR>OK

Restart

[dr.mansoor]

Re: know solving a error code

COPIER>FUNCTION>CLEAR>ERR). were is this pathway?in setting in my meshine?pls tell me step by step.tanks

[dr.mansoor]

Re: know solving a error code

okkk.very very thanks.very gooddd.

[teckat]

Re: know solving a error code

Wery generous!

[ATTACH=CONFIG]12911[/ATTACH]

iR105 Troubleshooting.pdf

[teckat]

Re: know solving a error code

hi.thanks dear feiend.for example 000069.

I just posted u above >an entire pdf of the ERROR CODES descriptions/ did u download it or read it

http://www.copytechnet.com/forums/at...105-errors.pdf

E069
Main cause The HV-DC PCB is faulty. The HV-AC PCB is faulty. The transfer charging assembly is faulty. The wiring is faulty (short circuit, open circuit). Condition

-0000 An error (leakage) is detected in the high-voltage output to the transfer charging assembly.


here is a one page pdf for troubleshooting E069

[dr.mansoor]

Re: know solving a error code

Send error code please.

hi.thanks dear feiend.for example 000069.

[zoraldinho]

Re: know solving a error code

Wery generous!

eyiew7x.gif

[teckat]

Re: know solving a error code

Hi.can i know error codes of my meshine (canon ir 105+) and solving them?pls send me a broshor containing all of error code.thanks

see pdf___iR105 ERROR CODES

[teckat]

Re: know solving a error code

Hi.can i know error codes of my meshine (canon ir 105+) and solving them?pls send me a broshor containing all of error code.thanks

The error codes are grouped as follows according to the items they refer to:
E000 to E399 error code =related to the copier
E400 to E499 error code =related to the ADF
E500 to E514 error code =related to the finisher
E515 error code =related to the inserter
E518 error code =related to the paper folding unit
E530 to E595 error code =related to the finisher
E5F0 to E5F9 error code =related to the saddle stitch assembly
E601 to E830 error code =related to the copier

When the self diagnostic mechanism has gone ON, the machine may be reset by turning its power switch. This, however, does not apply to E000, E001, E002, E003, E004, E005, E013, E020, or E717, indicating a fault which can lead to serious consequences if the machine is reset without removing the cause (i.e., melting thermistor, which will overheat the fixing roller, or overflowing of toner from the hopper).
-If the code is from E000 to E003, the power switch will go OFF in about 30 sec if it is turned ON without resetting; in the case of E004, the power switch will go OFF in about 3 sec after indicting E000 if the power switch is turned ON without resetting.
-You will have to clear the data in the RAM on the DC controller PCB for the following: E000, E001, E002, E003, E004, E005, E013, E020, and E717.

[zoraldinho]

Re: know solving a error code

Send error code please.

[mramlawi]

Re: know solving a error code

hello Dr .

you know there alots for error codes for this machine ,you just want to take information or you have an error want to solve it .anayway
i ll do my best to scan for u some of it .

[dr.mansoor]

Hi.can i know error codes of my meshine (canon ir 105+) and solving them?pls send me a broshor containing all of error code.thanks