How to flash Canon IR2200 HDD

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GromBG
    Technician
    • Oct 2010
    • 24
    #1

    How to flash Canon IR2200 HDD

    Guys can u give me some tip how to flash HDD of IR2200 when he is out of machine. I have latest firmware and ofcourse HDD,can i just flash it when i connect HDD on dekstop computer over IDE cable or do i need something else insted?

    Help me if u can tnx!
    Tags: 200, canon, connect, donate, firmware, flash, hdd, ir2200, nec
    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387
      #2
      Re: How to flash Canon IR2200 HDD

      HDD has to be in the machine and loaded with the SST (service support tool) the manual for that is posted in here within the past couple of days. It will give you the steps on how to load it. You are also going to need a USB to parallel cable to load it if your PC does not have a parallel port on it.
      Accidents don't just happen. They must be carelessly planned.

        Comment

        • vj200729
          print mate

          50+ Posts
          • Apr 2008
          • 81
          #3
          Re: How to flash Canon IR2200 HDD

          you can copy/clone hdd with a new version hdd using hd clone professional.i use to do so.

            Comment

            • GromBG
              Technician
              • Oct 2010
              • 24
              #4
              Re: How to flash Canon IR2200 HDD

              Than you for fast replyes that help me so much.

                Comment

                • charm5496
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Apr 2008
                  • 2387
                  #5
                  Re: How to flash Canon IR2200 HDD

                  you are welcome!
                  Accidents don't just happen. They must be carelessly planned.

                    Comment

                    • jas0nmack
                      #6
                      Re: How to flash Canon IR2200 HDD

                      Hello, I have the same request as the OP in here. My company has an old IR2220N where the hard drive died. I searched the forums and tried to do the Check Disk repair and that didn't work. I pulled the drive and tried to do a raw image of it to see if I could save the data to clone to another drive but too much of the drive was corrupt.

                      I'm trying to donate this copier to a small school our company has in Honduras and there's a container ship going down on January 6th so I am hoping to get it working then. I have a ton of 2.5" IDE drives I can use but from reading I am going to need a copy of the Canon Service Support Tool, Firmware that works for the IR2220N and instructions. I already have a USB to Serial cable and I use that when needing to console into Cisco routers/switches and our Toshiba phone systems. The organization I work for is a non-profit which forces me to be a jack of all trades and I hope I can be pointed in the right direction. From reading the Canon SST thread, wasn't sure how to ask since it seems like they crucify some of the people requesting.

                      Please let me know if I need to create a new thread, I didn't want to hijack this one but I also didn't want to fill this forum with dupe requests for the same thing. I'm hoping to be able to fix this for free if possible.

                      Thank you!

                        Comment

                        Previous template Next
                        Working...