Canon IR5055 ERROR CODE808-OO2

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • COPIERTEC ASSOCIATES
    Trusted Tech

    250+ Posts
    • Aug 2011
    • 279

    #1

    Canon IR5055 ERROR CODE808-OO2

    Hi guys am working on the above machine and shows the above code. Assistance requested thanks in advance
  • gensys
    Trusted Tech

    250+ Posts
    • Jan 2011
    • 323

    #2
    Re: Canon IR5055 ERROR CODE808-OO2

    Originally posted by COPIERTEC ASSOCIATES
    Hi guys am working on the above machine and shows the above code. Assistance requested thanks in advance
    E808 IH power supply input error

    0002 The IH power supply input voltages are lower than the stipulated voltages[/LEFT]

    - >>> Check the connection of the connector.
    - >>> Replace the fixing heater power supply.


    Last edited by gensys; 11-17-2011, 01:18 PM.
    The Road will be Mastered by >>> the Going...

    Comment

    • charm5496
      Service Manager

      Site Contributor
      1,000+ Posts
      • Apr 2008
      • 2387

      #3
      Re: Canon IR5055 ERROR CODE808-OO2

      Originally posted by COPIERTEC ASSOCIATES
      Hi guys am working on the above machine and shows the above code. Assistance requested thanks in advance
      check the wall voltage. Have seen this code numerous times where the wall voltage coming into the machine was noisy or inconsistent
      Accidents don't just happen. They must be carelessly planned.

      Comment

      • DAG COPIERS & COMPUTERS
        Senior Tech

        500+ Posts
        • Oct 2010
        • 860

        #4
        Re: Canon IR5055 ERROR CODE808-OO2

        Charm is right. If the copier is connected to an EXTENSION socket it could be the culprit. You must be aware of the numerous FAKE electrical accessories on our market. try another good extension socket or plug copier direct on wall socket n see if this rectifies the problem. I had same problem.

        Comment

        • COPIERTEC ASSOCIATES
          Trusted Tech

          250+ Posts
          • Aug 2011
          • 279

          #5
          Re: Canon IR5055 ERROR CODE808-OO2

          Hhm!! this rats!! The wiring had been destroyed by the rats, rewired the machine and tis ok. Thanks very much all the technical crew.Best regards.

          Comment

          • charm5496
            Service Manager

            Site Contributor
            1,000+ Posts
            • Apr 2008
            • 2387

            #6
            Re: Canon IR5055 ERROR CODE808-OO2

            yikes!!
            Accidents don't just happen. They must be carelessly planned.

            Comment

            Working...