iRC5185

[Apach]

Hello,

Today I replaced the fixing unit and the ITB unit. Before I replaced the print look like this

Before.pdf

After deleting the execution of all mistakes, cleaning main unit, autoadjustment I got this print

After.pdf


Printing from computer and copy give me the same result. Before going to replace drum units do you have any advice?
Tnx for help.

[zoraldinho]

Re: iRC5185

Make a force stop and check print quality on drum and ITB.What exactly do you deleting? Do you have an issue with all colours?
Check primary transfer roller on ITB.

[vigour]

Re: iRC5185

what do you mean by --deleting all mistakes?
did you do error and jam history clear
or did you do dc con or main controller clear.

if you did do a dc con clear ---you have to re-enter the door spec (or PPRINT) values
post a colour print, pg6, pg5 and pg10

looks to me like your laser values are wrong
or maybe primary transfer rollers as zoralindo said .

put the old itb unit back and compare

[Apach]

Re: iRC5185

I try with old ITB but each time paper jam in secundary transfer roler. Old ITB is oldest type then new one like a fixing unit Here is PG print

PG5.jpg PG6.jpg PG10.jpg

Now also another problem. Colour image reader (duplex) when I put paper and push the start, give me jaming papir without start scaning. I try to look for paper but all is clear.