If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
you will find loads of threads on this site for your problem,just do a search.think your next thing to try is to clear the dc-con but do a d and p print first so you can re input settings.
if you search the threads there are instructions for performing the procedure. You have time pull the laser units out and turn the cams by hand till they click and then reinstall.
Accidents don't just happen. They must be carelessly planned.
I had a working irc3200 and caused the symptoms you have by cleaning the belt cleaning blade, i had to replace the blade with a new one to get rid of the miss registration.
Comment