I used Canon ir c3220 to connect to Fiery C1 for printing. It ran normally. Then, I reset it to the defaul factory but the computer refused to accept fiery. I opened Service level 1 and set COPIER > OPTION > INT-FACE > IMG-CONT and set 3 but it didnt accept fiery. What can I do now?
Note: I have 3 printer IR C3220 and 3 fiery, they were all refuse to accept
Thank for your help.
Note: I have 3 printer IR C3220 and 3 fiery, they were all refuse to accept
Thank for your help.
Comment