[Misc] No Scan Button on the touch panel

[nochick]

I used to use Canon iR 3300 / 4570 / 6570 every machine have Scan button

But i just buy 2nd hand iRC3220 From Friend and there's no Scan Button on the touch panel / there're have Copy-send-Mailbox

Do i have to use MEAP ??

Or what can i do?

Thank you

[DANIELCANON]

Re: No Scan Button on the touch panel

*28*
*2 (LEVEL 2)
COPIER
BODY
UI-RSCAN:1 esta opcion debe estar con valor 1.

[nochick]

Re: No Scan Button on the touch panel

gracias

Voy a tratar de

[teckat]

Re: No Scan Button on the touch panel

I used to use Canon iR 3300 / 4570 / 6570 every machine have Scan button

But i just buy 2nd hand iRC3220 From Friend and there's no Scan Button on the touch panel / there're have Copy-send-Mailbox

Do i have to use MEAP ??

Or what can i do?

Thank you

ALSO CHECK>>>

A simple way to verify that a Resolution Switching Board (Send Board) is installed in the imageRunner is to check in Service Mode.

*28* > Copier > Display > ACC-STS > SEND

SEND will indicate "0" if NO Resolution Switching Board in installed
SEND will indicate "1" if the Resolution Switching Board is installed




If the imagePass C-1 or the Multi-PDL printer board A1 is installed you must also have the Resolution Switching Board installed.
If the Resolution Switching Board is not installed, the scan button will not be enabled on the control panel.

To identify if the Resolution Switching Board is installed, and installed correctly, first look at the board slot covers on the cage unit at the back of the imagerunner.
The Resolution Switching Board is NOT installed if the second cover from the bottom has two bumps (nipples) diagonally across from each other. If the plate surface is flat, the board is installed.

Next, check that the board is installed correctly. Remove the back cover of the Color imageRUNNER copier.
back cover.JPG

Once the back cover is removed, the metal plate has to be unscrewed.
Note: When removing the metal plate, be careful not to break the fan wire and not to damage the power supply.
Fan Wire.jpg
The Resolution Switching Board is pictured Below. It is installed in the second PCI slot from the bottom. Re-seat the board to refresh the connections.
WARNING: Power off the imageRUNNER before disconnecting any electrical components.
resboard.jpg