[Error Code] E000007-0211

[richard_hosea25]

can anybody tell me what is E000007-0211 in canon CLC4040? Thanks.

[charm5496]

Re: E000007-0211

this is an error with your fuser unit. you can try adjusting by doing these in service mode:

1) Enter the Service mode. Select COPIER > FUNCTION > FIXING > FX-UHP-S > OK

2) Check that 'FX-UHP-S is OK. This will take approximately 5 minutes.

3) Enter the Service mode. Select COPIER > FUNCTION > FIXING > FX-LHP-S > OK

4) Check that 'FX- LHP -S is OK. This will take approximately 5 minutes.


That subcode is not listed anywhere so you may want to pull out the fuser assembly and inspect it for damage or belt displacement. it might need replacing

[richard_hosea25]

Re: E000007-0211

this is an error with your fuser unit. you can try adjusting by doing these in service mode:

1) Enter the Service mode. Select COPIER > FUNCTION > FIXING > FX-UHP-S > OK

2) Check that 'FX-UHP-S is OK. This will take approximately 5 minutes.

3) Enter the Service mode. Select COPIER > FUNCTION > FIXING > FX-LHP-S > OK

4) Check that 'FX- LHP -S is OK. This will take approximately 5 minutes.


That subcode is not listed anywhere so you may want to pull out the fuser assembly and inspect it for damage or belt displacement. it might need replacing

Thanks. I guess I might need a new fusing unit..removing the belt is too difficult.