Message in canon ir 2018

[raztech]

[Rachid.Akli]

Re: Message in canon ir 2018

Hi every body

If your machine is equiped with a fax option, it means that the machine memory is full of received messages without being able to print them. At the limit try to print them or execute a "CLEAR ALL" beying aware that the fax numbers might be cleared.

Rachid.

[teckat]

Re: Message in canon ir 2018

performing ALL CLEAR in service may clear out the message " Memory is Full " and resolved the service issue.

To perform ALL CLEAR in service mode, enter service mode by pressing the Additional Functions key then the number 2 key then the number 8 key then the Additional Functions key again.
#SSSW will appear on the display. Use the arrow keys and scroll to # CLEAR then select OK.

Use the arrow keys and scroll to "ALL" then select OK. "Please Wait" will appear on the display. After awhile, the copier will reboot then come "Ready".
-----------------------------------------------------
For the imageRUNNER 2016 / 2020 / 2018 and 2022 the standard memory installed on the Image Processor pcb is 128MB. It is possible to upgrade to 256MB of memory.
For the imageRUNNER 2018 and 2022 just add another 128MB strip of memory to the open slot, J2, on the Image Processor pcb. Part number for the 128MB strip of memory is FM3-3324-000.