IRC4080 colour alignment

[teckat]

Re: IRC4080 colour alignment

updating by crossover.....and update all

all of this needs to be registered /

if Languagedoes not match MN-CONT > U can get that do not turn off printer message that will not go away

or your HDD could be going bad

or u should FORMAT that HDD and do a ALL-HDF

MN-CONT v94.01
Language v94.01 (JEFIG)*
BootROM v78.01
RUI v91.01 (JEFIG)*
MEAP Cont v92.02
Pre Install App v3.50
SDL v1.15.0
SSO v3.10.0
Portal Service v2.1.2
Security Agent v3.0.1
DCON
v68.03 [CiRC5180/C5185]
v68.03 [CiRC4080/C4580]
RCON
READER-F1=CiRC4080/ C4580/ C5180
v2.03 RCON
v1.00 ADF
READER-G1=CiRC5185
v6.01 RCON
CL_DFR1 v4.01 ADF (DL Tool)
SDICT v20.04
KEY v1.01
TTS v5.01 (JE)*
ASR v2.01 (JE)*
Browser v75.02
WebDAV v82.01
Media v68.01
Help v82.01
Super G3 Fax Board-V3 v80.01
Super G3 Multi-Line Fax Board-H3 v2.11
HDD v00.15
Finisher-W1/W2 Fin_W v8.01 Stacker (DL Tool)
Saddle Finisher-W2 Fin_W v5.01 Saddle (DL Tool)
Finisher-X1 Fin_X1 v7.03 Controller (DL Tool)
Puncher Unit-AH1 Pun_LMNP v5.02 Controller (DL Tool)

Wireless Network Board-W1**_(** Upgraded within the system version)
v1.12 Kernel
070521 DINK

[steve schofield]

Re: IRC4080 colour alignment

thankyou teckat.....I will delete and re register firmware and return to machine tomorrow and report outcome.....many thanks

[steve schofield]

Re: IRC4080 colour alignment

updated all firmware to latest ..perform reg clear and full adjust...perfect!!!...thanks for all your help teckat!! TOP MAN!

[teckat]

Re: IRC4080 colour alignment

updated all firmware to latest ..perform reg clear and full adjust...perfect!!!...thanks for all your help teckat!! TOP MAN!

Thumbs up.jpgwelcome