Printing took longer on Network IR2525i Cannon Copier

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lauanboy
    • Feb 2025

    Printing took longer on Network IR2525i Cannon Copier

    Hello,

    I am from Fiji, recently purchase two IR2525i Cannon both have been configured to handle Network printing, Now i faced problem when we try to print from our individual machines....those that have Win XP 32bit doesnt face this issue of printing delay, for those of us who have WIN 7 Pro 64bit faced printing delay as much as 30minutes and it is really fustrating.

    Is there someone our here could help me with this issues.

    Looking forward to your replies.
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16092

    #2
    Re: Printing took longer on Network IR2525i Cannon Copier

    Originally posted by lauanboy
    Hello,

    I am from Fiji, recently purchase two IR2525i Cannon both have been configured to handle Network printing, Now i faced problem when we try to print from our individual machines....those that have Win XP 32bit doesnt face this issue of printing delay, for those of us who have WIN 7 Pro 64bit faced printing delay as much as 30minutes and it is really fustrating.

    Is there someone our here could help me with this issues.

    Looking forward to your replies.


    what print drivers ver. are u using ????
    Canon U.S.A. : Support & Drivers : imageRUNNER 2525
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • lauanboy

      #3
      Re: Printing took longer on Network IR2525i Cannon Copier

      As default we usually Select USA or English Installation File....i hope this answer your question

      Comment

      • lauanboy

        #4
        Re: Printing took longer on Network IR2525i Cannon Copier

        WOOOW!!!....There are lots of Drivers available there...could you please advice me on which one i should select for my Network Copier

        Comment

        • doktor
          Trusted Tech

          100+ Posts
          • Jan 2010
          • 214

          #5
          Re: Printing took longer on Network IR2525i Cannon Copier

          The right one for your operating system

          Comment

          • lauanboy

            #6
            Re: Printing took longer on Network IR2525i Cannon Copier

            I user PCL53-c_6_V20.65 64bit. But it still there is no print out. When i troubleshoot from Windows 7 it says to contact the Network Administrator since the Computer cannot contact the Copier.

            Looking forward to everyones help...

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16092

              #7
              Re: Printing took longer on Network IR2525i Cannon Copier

              Originally posted by lauanboy
              I user PCL53-c_6_V20.65 64bit. But it still there is no print out. When i troubleshoot from Windows 7 it says to contact the Network Administrator since the Computer cannot contact the Copier.

              Looking forward to everyones help...

              Perform an ALL CLEAR
              go in Service Mode > Clear > All > ok. /
              then power off/on printer


              go in service mode/post your set up

              #REPORT
              Configuration


              SERVICE DATA LIST
              "Service mode service soft switch output (SSSW, MENU, NUMERIC
              Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM,
              start date)"
              SYSTEM DATA LIST "Service mode service soft switch output (SSSW, MENU, NUMERIC
              Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM,
              start date) System dump list output"

              PRINT SPECIFICATION
              PDL UFRII-LT, PCL5e/6 (standard on i models )
              PostScript level 3 emulation (optional)

              Supported OS Windows 2000/XP/Server 2003/Vista/Server 2008/Windows 7, Mac OS X (10.4 or later), Linux

              SEND SPECIFICATION/
              CLR SEND KIT-Y1 (standard on i models,
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

              Comment

              Working...