Please Connect Imagerunner

[Francisco Smith]

I can't connect the 105 to the M2 Keeps giving me the error
Please connect the imagerunner. I put a crossover cable and
still the same message. any clues? Thanks

[yourownfree]

no idea

none! tell us more. do you have a "c" version boot rom? is it set in service mode to accept the image pass?

[Irish]

Are the two network cables going into the rip the right way around?

[welshman]

image runner

you need to go into service mode *2 8 *
then copier
then option
change int-f to 4 or maybee 2 cant remember off hand
restart machine

do not use a crossover cable normal patch lead needed

should then see the image runner

make sure you turn on the copier first then the m2

[Canuck]

Like Irish said,make sure network cable is plugged into correct jack on rip..other jack goes to machine..make sure scsi cable is plugged in correctly..if all else fails re_install system software for rip..simple..its a cd..not like older rips needing scsi drive to install. First make sure option>int-face>img-cont is set to 1 for external fiery controller.Re-boot machine after making settings.This info is for M1..maybe different for M2