If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi Guys. When printing to a Canon iRC4080 the machine often suspends the jobs and gives the messege PDL GL memory full. It can sit like that for 30 mins then start to print again. Any help would be appreciated. Thanks
sounds like your memory sticks on the main controller are going bad or have a poor connection with the main controller. You may need to replace them and/or the main controller.
Accidents don't just happen. They must be carelessly planned.
Comment