Canon IRC 2030 E000074-0000

[pcernicky]

Hi,

Got Copier with E000074-000 error code. Check all connections and harnesses, DC controller/PTDS.

All seems OK!.

Someone else was trying to fix the copier, now is in error code mode.

Please help.


Thank you.

[zoraldinho]

Re: Canon IRC 2030 E000074-0000

ITB Guide Rail or Transfer Disengagement Solenoid not in the wright place.Also check ITB drive.

Capture_080.jpg

[pcernicky]

Re: Canon IRC 2030 E000074-0000

Does anyone knows part number for ITB Unit for IRC2030 and the price?

Thank you.

[Rachid.Akli]

Re: Canon IRC 2030 E000074-0000

Hello,

FM3-8240-000000 is the ITB part number. Sorry, i don't have the price.

Rachid.

[pcernicky]

Re: Canon IRC 2030 E000074-0000

The color copy quality is really bad, color is off and light horizontal lines, check the sky-shot on the black drum and it's grey not solid black plus i see 2 inch void area around drum.The drum unit is brand new.
Just want to confirm that the issue is ITB unit.

Copier has 10k copies, but it wasn't working right for couple months and also some other guy was playing here with the copier.

Thank you for advice.

[teckat]

Re: Canon IRC 2030 E000074-0000

The color copy quality is really bad, color is off and light horizontal lines, check the sky-shot on the black drum and it's grey not solid black plus i see 2 inch void area around drum.The drum unit is brand new.
Just want to confirm that the issue is ITB unit.

Copier has 10k copies, but it wasn't working right for couple months and also some other guy was playing here with the copier.

Thank you for advice.

Is the tech trained on this Advanced series model ????

some techs think they can just walk up and repair anything that prints
E074 is an Error in the Primary Transfer Disengagement Control.
Check SW1 ( Primary Transfer Disengagement Switch) for Displacement

[pcernicky]

Re: Canon IRC 2030 E000074-0000

It was the switch , the error code is gone, but I need to confirm the copy quality issue.

Thank you.

The color copy quality is really bad, color is off and light horizontal lines, check the sky-shot on the black drum and it's grey not solid black plus i see 2 inch void area around drum.The drum unit is brand new.
Just want to confirm that the issue is ITB unit.

Copier has 10k copies, but it wasn't working right for couple months and also some other guy was playing here with the copier.

Thank you for advice.

[teckat]

Re: Canon IRC 2030 E000074-0000

It was the switch , the error code is gone, but I need to confirm the copy quality issue.

Thank you.

The color copy quality is really bad, color is off and light horizontal lines, check the sky-shot on the black drum and it's grey not solid black plus i see 2 inch void area around drum.The drum unit is brand new.
Just want to confirm that the issue is ITB unit.

Copier has 10k copies, but it wasn't working right for couple months and also some other guy was playing here with the copier.

Thank you for advice.

if u still have a CQ issue/ post some copies of them/

also post some TEST PRINTS

[Rachid.Akli]

Re: Canon IRC 2030 E000074-0000

Hi,

This model has black CQ issue. Most of the time, it doesn't display any message when the black toner bottle is empty. This will lead to a lack off black toner on the dev cylinder and ends up with a low density or an error code (E020). I advise you to to verify the black toner bottle content and the black density on Display> Dens > SGNL-K. In normal conditions , it's arround "0". If it isn't the case, you can execute a toner supply, switch "off" and "on". Do it until the toner SGNL-K recovers its normal value (arround 0).


If the black CQ is recurrent, replace the black toner hoper with the new part number: FM3-8084-010000

Replacing the Black drum is not the solution.

Rachid.

[sx633]

Re: Canon IRC 2030 E000074-0000

Is the tech trained on this Advanced series model ????

some techs think they can just walk up and repair anything that prints
E074 is an Error in the Primary Transfer Disengagement Control.
Check SW1 ( Primary Transfer Disengagement Switch) for Displacement

Is that the tiny little black microswitch behind the main drive assembly ?

[teckat]

Re: Canon IRC 2030 E000074-0000

Is that the tiny little black microswitch behind the main drive assembly ?

YES
At the primary transfer disengagement control, the sensor fails to detect although the specified time has passed (the
specified time differs depending on the mode)



Error in the Primary Transfer Disengagement Solenoid, Error in the Primary Transfer Disengagement Switch, or the ITB
Guide Rail error.

1. Replace the ITB Unit
2. Check the harness/connector between the DC Controller
PCB (UN09/J11) and the Primary Transfer Disengagement
Switch (SW01)
3. Check the harness/connector between the DC Controller
PCB (UN09/J11) and the Primary Transfer Disengagement
Solenoid (SL01)
4. Check conduction of FU6 on the DC Controller PCB (UN09)
5. Replace the ITB Guide Rail
6. Replace the Main Drive
7. Replace the Fixing Drive
8. Replace the DC Controller PCB (UN09)

[sx633]

Re: Canon IRC 2030 E000074-0000

Thought so, I discovered that today.
E020-0191, colleague ordered main drive assembly, which I fitted (and refitted numerous times) and now can't clear E074.
Got DC cont' and fuser drive assembly on order now.

[teckat]

Re: Canon IRC 2030 E000074-0000

Thought so, I discovered that today.
E020-0191, colleague ordered main drive assembly, which I fitted (and refitted numerous times) and now can't clear E074.
Got DC cont' and fuser drive assembly on order now.

-----------------------------------------

there are a mass amount of connectors to check/

also u need to follow the re-positioning procedure > or u will have error codes ?????????????????
i will try and post a video later

[godyng]

Re: Canon IRC 2030 E000074-0000

-----------------------------------------

there are a mass amount of connectors to check/

also u need to follow the re-positioning procedure > or u will have error codes ?????????????????
i will try and post a video later

Is the video has been posted ???

[teckat]

Re: Canon IRC 2030 E000074-0000

Is the video has been posted ???

image RUNNER ADVANCE C2020 / C2030
How to replace the Main Drive Assembly