ir7200 A4R & A3 Jam

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jiongpao
    Trusted Tech
    • May 2009
    • 413
    #1

    ir7200 A4R & A3 Jam

    Hi, when we use A4 printing its find like usual even double sided. But using cassette 3 A4R and cassette 4 A3 it always jam even a single copy. Display show proper A4R and A3 on both cassettes. It jam on same place between fixing shown on picture. I only can think is clean the sensors around the path but no cure. Please give me any advice?

    A4R & A3 jam.jpg
    Tags: None
    • vigour
      Service Manager

      1,000+ Posts
      • Aug 2010
      • 1038
      #2
      Re: ir7200 A4R & A3 Jam

      what is the jam code
      will it run these sizes from bypass?
      maybe the key in your fuser gear is broken

        Comment

        • gensys
          Trusted Tech

          250+ Posts
          • Jan 2011
          • 323
          #3
          Re: ir7200 A4R & A3 Jam

          Originally posted by jiongpao
          Hi, when we use A4 printing its find like usual even double sided. But using cassette 3 A4R and cassette 4 A3 it always jam even a single copy. Display show proper A4R and A3 on both cassettes. It jam on same place between fixing shown on picture. I only can think is clean the sensors around the path but no cure. Please give me any advice?

          [ATTACH=CONFIG]14300[/ATTACH]
          JAM CODE???????
          CHECK UP fuser gear
          The Road will be Mastered by >>> the Going...

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083
              #4
              Re: ir7200 A4R & A3 Jam

              Originally posted by jiongpao
              Hi, when we use A4 printing its find like usual even double sided. But using cassette 3 A4R and cassette 4 A3 it always jam even a single copy. Display show proper A4R and A3 on both cassettes. It jam on same place between fixing shown on picture. I only can think is clean the sensors around the path but no cure. Please give me any advice?

              [ATTACH=CONFIG]14300[/ATTACH]






              mind-reader real.jpg jam code is_ _ _ _ _ _ _ _ _ _ _ _
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • jiongpao
                  Trusted Tech
                  • May 2009
                  • 413
                  #5
                  Re: ir7200 A4R & A3 Jam

                  hi the jam is 206 for both A4R and A3

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083
                      #6
                      Re: ir7200 A4R & A3 Jam

                      Originally posted by jiongpao
                      hi the jam is 206 for both A4R and A3



                      0206 jam code is a stationary jam at PS49(Vertical Path 2 Sensor).
                      Replace Clutch CL9-----VERTICAL PATH DRIVE ASSEMBLY
                      FH7-5826-020 1 CLUTCH, ELECTROMAGNETIC CL-- J264
                      CL9.JPG

                      Check that the proper operation of PS 49 sensor and flag be verified.

                      Check the Vertical Path Roller for wear on the shaft or bearings. It has been found that if the shaft and bearings are worn a jam code of 0206 may be displayed

                      ps49.JPG


                      26 FK2-0149-000 1 PHOTO-INTERRUPTER, TLP1253(C6) PS49

                      4 FB4-1350-000 1 ROLLER, VERTICAL PATH

                      43 XG9-0250-000 1 BEARING, BALL
                      41 XG9-0249-000 1 BEARING, BALL
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • jiongpao
                          Trusted Tech
                          • May 2009
                          • 413
                          #7
                          Re: ir7200 A4R & A3 Jam

                          Hi, it has been long time hehe sorry, now the machine is working normally, we totally cleaned/ reassy the unit 1 including the registration assy and all the sensors at right doors. Thank you

                            Comment

                            Previous template Next
                            Working...