Network Scangear Driver 64 bit for Windows 7

[kamrankhan]

Re: Network Scangear Driver 64 bit for Windows 7

Thanks teckat, you are correct this is the right driver but after some long nights could still not get the driver to load and enable application software to see the Scangear driver. Late last night I happened across a solution which is too large to detail all the steps here, but essentially the Color Network Scangear v2.71 has to be installed in Windows XP compatibility mode. Having done this all applications can now see the scanner. I have tried it with success on several 64 bit machines on the network and as a consequence imbibed a celebratory bottle of wine into the wee hours of this morning. Please see the attachment, I hope it works for others. I will be interested to hear. Good luck, Artisan

HI Aristan thank you very much for your detailed info on the issues of the Colour Network Scangear v2.71. I have followed your instructions to the letter but still my PC cannot find my scanner for my Canon iRC2380I. I have the Canon printer installed at home directly to my PC via printer cable thus I do not even have a network nor an IP address for the printer! I have spent many a sleepless trying to set up this scanner but to no avail. Is there anything else you can advice which may help? Anything would be very much appreciated. Thanks

[teckat]

Re: Network Scangear Driver 64 bit for Windows 7

HI Aristan thank you very much for your detailed info on the issues of the Colour Network Scangear v2.71. I have followed your instructions to the letter but still my PC cannot find my scanner for my Canon iRC2380I. I have the Canon printer installed at home directly to my PC via printer cable thus I do not even have a network nor an IP address for the printer! I have spent many a sleepless trying to set up this scanner but to no avail. Is there anything else you can advice which may help? Anything would be very much appreciated. Thanks

have u tried using USB for connection between PC & Printer
Set Use USB Device to 'On' to connect a computer with the machine via the USB port.
1 -Press -[System Settings] - [USB Settings] -[Use USB Device].
2 -Select [On] or [Off] -press [OK].




C3580i/iR C3080i/iR C2380i supports the UFR II and PCL printing function as standard.
have u installed these drivers ??

The compact iRC2380i, iRC3080/i and iRC3580/i can be housed anywhere –
connecting wirelessly to your network (LAN) and ready to go in minutes.

[kamrankhan]

Re: Network Scangear Driver 64 bit for Windows 7

Tried everything you said and still not working! Any further help would be appreciated. QUOTE=teckat;322866]have u tried using USB for connection between PC & PrinterSet Use USB Device to 'On' to connect a computer with the machine via the USB port.1 -Press -[System Settings] - [USB Settings] -[Use USB Device].2 -Select [On] or [Off] -press [OK].C3580i/iR C3080i/iR C2380i [/QUOTE]