canon ir5870c e0350

[hamdyyassin]

please i need help with my copier ir5870c it comes with e0350 ,i made clear for mn con but the error is still
happend

[teckat]

Re: canon ir5870c e0350

E350 soft ID PCB/function fault


are u swapping pcb.'s // as in ECO pcb or Serial pcb ,Counter pcb.

E350 Fault in the soft ID PCB/function
0000 An error exists in the add-on parity. Reset in service mode, and replace the soft ID PCB.
0001 An error has occurred in the course of full data read operation on the soft ID PCB.
Turn off the main power, and check the connection of the soft ID PCB. If the remedy
fails, replace the soft ID PCB.
0002 The value of the check sum area of all data read from the soft ID PCB and the result of checksum computation do not match.
Turn off the main power, and replace the soft ID PCB. If the remedy fails, replace the soft ID PCB.
0003 The values in the soft ID check sum area of FRAM, SRAM1, and SRAM2 and the result of a check sum
computation differ.
Turn off the main power, and check the connection of the soft ID PCB. If the remedy
fails, replace the soft ID PCB.
3000 While an E350 error is backed up, the value of the check sum area of all data read from the soft ID PCB and the result of check sum computation do not match.
Turn off the main power, and check the connection of the soft ID PCB. If the remedy
fails, replace the soft ID PCB.