Driver iR3300i japan version

[Guest]

Now we have canon iR3300i version japan. It can print by used LIPS LX driver but it is japan language. Cannot use driver PS/PCL (English version)
If I want driver iR3300i is version english. Where I can search? Thank you.

[welshman]

driver

go to Canon UK - Home

download the driver from there it will be in english
you will need to install english firmware to the machine as well
for that you will need english software disk for the machine and service support tool

good look in finding the english machine software

[wachira]

Thank you for reply. I did download and installed but cannot print. Copier indicate in print log NG. Now I changed firmware to english. Driver PCL cannot use with this copier because it use LIPS Board (BootROM "C") if I use driver japan can use.

[welshman]

download the ufr driver

hi

download the ufr 2 driver from the english site this should work as the boot c rom is a copier rom so must have ufr board installed

regards

[Canuck]

Set configuration...service mode cop>opt>body>config...XX:country,YY:language,ZZ:de stination,AAaper configuration-Select item(highlight),press+/- to change..when desired item is selected, press OK. Power off then on...

[wachira]

For font of copier I can. But I have problen driver printer only. Because it use driver LIPS LX version japan only I want driver LIPS LX version english.
Thank you everyone for reply and answer to me.