Jam with code 0111 on iR -ADV 6075when duplexing !

[Ingranaggio_rotto]

I'm back!
I have this interesting problem: iR-ADV 6075 with code jam 0111 when duplexing.
The defect is in the detachment of the paper transfer unit ... I've encountered working with the door open.
Is there a way to improve the separation of paper from the drum when it concerns the second side?
Or, have you solved in another way?
Thank you.

[charm5496]

Re: Jam with code 0111 on iR -ADV 6075when duplexing !

adjusting this in service mode should help >>>>ADJ > HVTR >TR-L-OF1.
this increases the seperation current

[Ingranaggio_rotto]

Re: Jam with code 0111 on iR -ADV 6075when duplexing !

Thanks for the information. I will try this ! ! !

[sugumaran]

Re: Jam with code 0111 on iR -ADV 6075when duplexing !

hi is the solution works... >>>>ADJ > HVTR >TR-L-OF1????

[dan7777]

Re: Jam with code 0111 on iR -ADV 6075when duplexing !

Thanks for the information. I will try this ! ! !

If that does not work for you try to put bearings in the reverse delivery unit where the bushings were. I had a school that had jamming problems and did a lot of duplexing. I put the bearings in about two years ago and have run more than a million with no more jamming problems. Also either clean the bushing in the assembly you open to the left of the fuser or replace the bushing with a bearing.