iR C3200 Wrinkles/Crumples Legal and Tabloid Prints

[kefmaster]

My iR C3200 has begun producing wrinkles on legal and tabloid sized sheets. This was not always the case. I'm not sure when it began because I don't print those sizes often but I am going to have to print on legal size paper soon. Letter sized paper prints fine. Any help would be appreciated. I've attached some photos to illustrate the output I'm getting.legal_sheet_closeup.JPGtabloid_closeup.JPGtabloid_closeup2.JPG

[btobject]

Re: iR C3200 Wrinkles/Crumples Legal and Tabloid Prints

check the fuser rollers

[kefmaster]

Re: iR C3200 Wrinkles/Crumples Legal and Tabloid Prints

check the fuser rollers

I took a look but not sure what I should be checking for.

[teckat]

Re: iR C3200 Wrinkles/Crumples Legal and Tabloid Prints

I took a look but not sure what I should be checking for.

make sure the paper is not old / moisture in paper also causes wrinkles
test a fresh ream---------------

make sure your paper is leaving the cassette correct
looks like the nip with is off (exact pressure points)
u can remove unit and inspect the black plastic paper inlet guide top ribs for stuck on waste toner(clean off)

or don't look for anything/
just replace the FUSER UNIT/