PC745- How to remove the bed glass to clean bottom side?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • burchis
    • Jul 2025

    #1

    [Misc] PC745- How to remove the bed glass to clean bottom side?

    I have spots on my glass that will not clean off. I tried using a razor blade but still no luck. I must assume that the spots are on the underneath side of the glass. How can I remove the glass for cleaning or get access to this side?

    Thanks.
  • Tec1
    Technician
    • Dec 2011
    • 48

    #2
    Re: PC745- How to remove the bed glass to clean bottom side?

    take off all covers and control panel

    then you will see how glass comes off

    Comment

    • burchis

      #3
      Re: PC745- How to remove the bed glass to clean bottom side?

      Will all covers come off by removing visible screws, or is there any hidden snap tabs to be concerned about?

      Comment

      • Tec1
        Technician
        • Dec 2011
        • 48

        #4
        Re: PC745- How to remove the bed glass to clean bottom side?

        i believe left side lower cover needs to be popped off with little tweeker.
        little holes in cover, put in driver and turn alittle

        note: sometimes you break tabs to get cover/covers off on some machines

        Comment

        Working...