CANON IR2535 ADF PROBLEM

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sweet.persona
    Engineer
    • Nov 2009
    • 414

    #1

    CANON IR2535 ADF PROBLEM

    Hello

    i have a new canon ir2535 after turning it On i was testing the ADF , but when i make document the paper Do not pass Full ( Passes only half ) I began to notice the problem But there is something strange , in the Scanner section there is Just the large Mirror , but there is No mirror for the ADF !(Small mirror)

    My question is in the CANON IR2535 serie there is The ADF mirror Or not!
    A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


    DAMENE ABDEL AZIZ
    DJELFA

  • Rachid.Akli
    Senior Tech

    500+ Posts
    • Oct 2011
    • 595

    #2
    Re: CANON IR2535 ADF PROBLEM

    Dear all

    It should be.


    Rachid.
    "Find a job you love and you’ll never have to work a day in your life." Nagy's father

    Comment

    • sweet.persona
      Engineer
      • Nov 2009
      • 414

      #3
      Re: CANON IR2535 ADF PROBLEM

      Lot of thanks Friend rachid.
      A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


      DAMENE ABDEL AZIZ
      DJELFA

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: CANON IR2535 ADF PROBLEM

        Originally posted by sweet.persona
        Hello

        i have a new canon ir2535 after turning it On i was testing the ADF , but when i make document the paper Do not pass Full ( Passes only half ) I began to notice the problem But there is something strange , in the Scanner section there is Just the large Mirror , but there is No mirror for the ADF !(Small mirror)

        My question is in the CANON IR2535 serie there is The ADF mirror Or not!
        iR2545/2535 Series
        Original scan /
        In book mode
        /Scan by movement of CCD
        In ADF mode/ Stream reading with CCD fixed
        under ADF Scan/Read Glass

        scan.JPG
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Working...