insertion unit c1 not recognized by ps driver

[fchu5959]

HI,
I'm running a Canon IPC 6010 VP(latest firmware) with a Fiery server A3200 system9R2 and CWS 5.3.1.32d.

I've installed an insertion unit c1 on top of a saddle finisher J2 ; The insertion unit is well recognized by the IPC6010VP and works perfectly.
However the c1 unit is not recognized by the ps driver and also not present in the cws even when i click on the update button in the driver.

i would appreciate any help to solve this issue.

cheers

[teckat]

Re: insertion unit c1 not recognized by ps driver

imagePRESS Server A3200 v4.1.1 PS driver for Windows Operating Systems.
read----imagePRESS Server A3200 v1.0.pdf

C6010 * C6010VP * C7010VP
PS3 Printer Driver v20.70

1. Click Start, Settings, Printers.
2. Right click the print driver icon and select Properties.
3. Select the Device Settings tab.
4. Click the Function... button.

* Note- If the Function button is grayed out, check and then un-check the Job Accounting check box. This will allow you to click the Function button
5. In the Device Function Settings window, set the Function Version to 2.0 or higher (pick the highest version listed). Hit OK.
6. Click Apply and OK.
* Some drivers will not have this Function button available. No extra configuration is required in these drivers that lack the Function button.

--If a user clicks Get Device Status to automatically configure the driver, it will set the Function Version back to None (in some versions of the driver). In order to use the sheet insertion, tab insertion, and chapter page insertion features, you will need to set the Function Version back to 2.0 or higher by following the above procedure.

To use the sheet insertion, tab insertion, and chapter page insertion features:

1. In the application (ex. Word), click File and Print. Select the driver for your copier and click Properties.
2. Select the Paper Source tab.
3. Drop down the Paper Selection: menu and select Inserting Sheet.
4. Click the Inserting Sheet Settings... button.
5. Configure your desired sheet insertion type, printing preference, paper source, insertion positions, and tab measurements as needed.
6. Click OK. Select any other desired driver options and then print the document.
* Note - This was previously a standard copy function and has been made a new function in the driver. This feature inserts up to 20 Slip Sheets or Chapter Pages.

[fchu5959]

Re: insertion unit c1 not recognized by ps driver

Hi,

Thanks a lot Teckat for your quick response;i really appreciate.

Take care.

[fchu5959]

Re: insertion unit c1 not recognized by ps driver

Hi,

I've been trying Canon sites (France,europe)to download the ps driver 4.1.1 for the A3200 Fiery controller but all i can find is the unique ps driver v1.0.

Could someone forward me the link please.

cheers

[teckat]

Re: insertion unit c1 not recognized by ps driver

Hi,

I've been trying Canon sites (France,europe)to download the ps driver 4.1.1 for the A3200 Fiery controller but all i can find is the unique ps driver v1.0.

Could someone forward me the link please.

cheers

check e-mail