clc4000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Luther
    Senior Tech

    500+ Posts
    • May 2006
    • 682
    #1

    clc4000

    Have to replace drums and blades on this machine and its been awhile since i saw one, do i have to do anything other then reset the drum counts or is there and adjustment like gamma or something similar? ...dont have the manual anymore and been awhile since i serviced one, any input wold be appreciated
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: clc4000

      Originally posted by Luther
      Have to replace drums and blades on this machine and its been awhile since i saw one, do i have to do anything other then reset the drum counts or is there and adjustment like gamma or something similar? ...dont have the manual anymore and been awhile since i serviced one, any input wold be appreciated
      CLICK ON LINK BELOW
      old manual is online in google search

      http://www.google.com/url?sa=t&rct=j...VZNMFg&cad=rja
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Luther
          Senior Tech

          500+ Posts
          • May 2006
          • 682
          #3
          Re: clc4000

          Thanks Tek

            Comment

            Previous template Next
            Working...