NP 6317 - Casette idicator

[Smiley27]

Hi !

Casette indicator is on ( red led ) all the time, I replaced (Q7) casette sensor, still doesnt work...

Board maybe?

Reset n33ded?

[zaza]

Re: NP 6317 - Casette idicator

hello well firstly you can clean this sensor Q7 and if he no function can you changing by other for same model as np1550 or np6216 ...l not be sure the mother card is broken there ..

[ZAZA_2012]

Re: NP 6317 - Casette idicator

Awawaw 6317 it's still alive !! somtimes i feel We are of the Stone Age !


Scientists develop technology and staying up late at night but Retardation in humans is still!

if u see this 6317 u found 999.999 in the counter .


Good Lukcy

[DAG COPIERS & COMPUTERS]

Re: NP 6317 - Casette idicator

Try to change the DC controller board.

Meanwhile, CHANGE in humans and other living things for that matter, has NEVER been a SPONTANEOUS affair. It is inherently a GRADUAL process. In any case, " An old broom sweeps better since it knows all the corners."

[Smiley27]

Re: NP 6317 - Casette idicator

Replaced :
DC controller PCB
Cassette papersensor (Q7)
Cassette size sensor PCB

Still lamp is ON -.-'




In my country, this machine is considered high technology : P ...

[DAG COPIERS & COMPUTERS]

Re: NP 6317 - Casette idicator

Does the cassette LOCK work and locks the cassette securely in place? Open the machine's rear cover and access that small sub- assembly board and check those springs which are pressed by the cassette when u push it in. Switch may not be making proper contact.
Try another cassette.

[Smiley27]

Re: NP 6317 - Casette idicator

@DAG COPIERS & COMPUTERS

You were right, casette couldnt reach sensor at the back side..

Thanks for Your help...


SOLVED.

[DAG COPIERS & COMPUTERS]

Re: NP 6317 - Casette idicator

It is good you are up & rolling. Thanks for the feedback.