Canon IR 2016j scaner problem >>> HELP

[minhkhanh]

I have a problem with the scaner of canon ir2016j
When I turn on the boot process is normal, scaner initial search at the sensor position possible.

But when making copies, the scanners does not scan nomarly (to the righ) that run back into the left cabinet. then hit it and keep running noise.

Any one have experience about this, please help me

Thank you!

[khoacoitnt]

Re: Canon IR 2016j scaner problem >>> HELP

I have a problem with the scaner of canon ir2016j
When I turn on the boot process is normal, scaner initial search at the sensor position possible.

But when making copies, the scanners does not scan nomarly (to the righ) that run back into the left cabinet. then hit it and keep running noise.

Any one have experience about this, please help me

Thank you!

Hic hic
This machine faulty cable, you change your cable is run, I met the same case.
You see the attachment parts.
Wish you success.
pig1.jpg

[minhkhanh]

[teckat]

Re: Canon IR 2016j scaner problem >>> HELP

I have a problem with the scaner of canon ir2016j
When I turn on the boot process is normal, scaner initial search at the sensor position possible.

But when making copies, the scanners does not scan nomarly (to the righ) that run back into the left cabinet. then hit it and keep running noise.

Any one have experience about this, please help me

Thank you!

click on pics

CIS.JPG
Reader Controller PCB
J406 = Connected to the contact image sensor (CIS) HP sensor.

J408 = Connected to the contact image sensor (CIS).

J409 = Connected to the reader motor.

READER PCB.JPG

[khoacoitnt]