7105 E005-0000

[Brian8506]

Web is good. New sensors. Saw a few posts from the past but nothing definitive. Wondering if the connectors on the back or the harness has been a problem

[jiongpao]

Re: 7105 E005-0000

Happen to me before. Need to clear counter web or else need to change DC Controller

[Brian8506]

Re: 7105 E005-0000

Copier will make a couple copies then code out. Counters are cleared and code resets

Web is good. New sensors. Saw a few posts from the past but nothing definitive. Wondering if the connectors on the back or the harness has been a problem

[Brian8506]

Re: 7105 E005-0000

Lower entrance sensor flag is broken where the spring hooks. Lower roller and bearings are gonna need to be replaced. Replaced sensors again because they both looked different even though they were in the same bag with the right part number. Took fuser entrance flag out and its running now. Wondering if theres a tie in that could give an e005

Copier will make a couple copies then code out. Counters are cleared and code resets

[Brian8506]

Re: 7105 E005-0000

Had to be bad sensors I replaced. I saved the ones I put in originally then took out. Put one in a 5055 for the shutter which is the same sensor and got an 840 code. Put back the one I took out and its OK. Just got a bad sensor.

[spectraindo]

Re: 7105 E005-0000

Warning : Do not mixed up sensors (photo interuptors)
they look the same but have different electrical characteristics.
Only replace with the same part number.

[Brian8506]

Re: 7105 E005-0000

Ironically, I've told many people the same thing. In this case, I ordered the right part number and there were two different sensors in the bag. Oh well. All in a days work.

Warning : Do not mixed up sensors (photo interuptors)
they look the same but have different electrical characteristics.
Only replace with the same part number.