SO I HAVE BEEN WORKING ON THIS IMAGECLASS FOR ABOUT A MONTH NOW AND STILL NO LUCK. AT FIRST, IT WOULD ALWAYS JAM WHEN %75 OF THE PAPER IS OUT OF THE FUSER...SOMEONE TOLD ME TO CHANGE THE SOLENOID, WHICH I ORDERED BUT WHEN IT GOT HERE AND TOOK THE MACHINE APART (AS MUCH AS I CAN) AND TRIED TO REPLACE IT, I NOTICED THAT IT WAS VERY DIFFICULT. I DO NOT EVEN KNOW HOW TO CHANGE IT...THE SOLENOID CABLE RUNS FROM THE FRONT OF THE MACHINE ALL THE WAY TO THE BACK. IT SEEMS LIKE I HAVE TO TAKE THE FUSER OUT ALSO IN ORDER TO CHANGE THE SOLENOID. BUT EVEN THE FUSER IS DIFFICULT TO CHANGE. SO I PUT IT BACK TOGETHER AND LEFT THE COPIER FOR ABOUT A WEEK OR MORE WITHOUT DOING ANYTHING TO IT. TODAY I THOUGHT OF WORKING ON IT, BUT WHEN I PLUGGED IT IN TO TRY AND SEE IF THE PROBLEM IS STILL THERE I GOT ANOTHER SURPRISE...SYSTEM ERROR E100. NOW I HAVE NO IDEA WHAT TO DO 
Comment