IR 7200 / 8500 trouble

[benjamin]

Hi all.. i have trouble for IR 7200/ 8500, the machine keep waiting after i turn on.. already resetting with sst and change the flash dimm but cannot work too.. anybody have the same experience? please help me... thanks

[lkrsardis]

8500

You may have a bad memory stick, but most likely it is the hard drive.
Try installing the boot and dimm rom to a working machine.

[benjamin]

You may have a bad memory stick, but most likely it is the hard drive.
Try installing the boot and dimm rom to a working machine.

Hi.. I already change the memory sticks , hard drive, boot and dimm rom.. Now the display is blank... Do you have other solutions with my problem here? Or anyone? Please help me.... Thanks...

[lkrsardis]

blank screen

Try powering up with thev 2and8 key held down. If the "DOWN LOAD" message appears reload the system software again. Is this machine networked? If you load the wrong boot-rom software you can get a blank screen also. The all day psu has been known to cause this problem also. Good luck.

[nyhunter]

the best thing is to reload the software makesure you have the right dims. Also do u get any errors make sure to wait for a while to see if any errors pop up you might have a bad main con too good luck

[links_Chen]

there is anyone know the canon Ir8500 servic manual
plz send to links_chen@yahoo.com

thks