Canon 7105 trouble with saddle finisher v2 and trimmer

[mascara]

I have a problem with finisher. After machine power on i cant do booklet.All accesories on but booklet trimmer off, bottom of the screen displays "failure Finisher". after "Ready to copy" words "functions are limited". The finisher can staple. If i energize relay on booklet trimmer, booklet trimmer fully functional. I check it from booklet trimmer service. in the machine itself has no error codes ( I think aboutsaddle controller pcb because from main finisher pwb comes +5 and +24 and led on the saddle pwb not lit, but im not sure that replace pwb solve my problem(((

\\google translate\\

[vigour]

Re: Canon 7105 trouble with saddle finisher v2 and trimmer

go into additional functions and turn limited functions off.
there is more than one so you have to scroll through them all.

Then investigate your trimmer problem, if any

[mascara]

Re: Canon 7105 trouble with saddle finisher v2 and trimmer

detail as possible because I do not know much canon.

[HELIO240]

Re: Canon 7105 trouble with saddle finisher v2 and trimmer

detail as possible because I do not know much canon.