ir5870 light copy

[zoraldinho]

Re: ir5870 light copy

You are not stupid.Just a moment for experience.(Nikola Tesla)

tesla2.jpg

[Apach]

Re: ir5870 light copy

I'm stupid. Resistor on sec. transfer. After replacing all is OK. Tnx

[vigour]

Re: ir5870 light copy

Change your Outer Secondary transfer roller and check Sec Trans Positioning Assy.
Do Drum Phase Adjustment

[Apach]

Hello,


Today, after cca 200 copies of the machine is stopped as if the paper is jammed. After removing jammed paper and restart machine I got up bright copy. Regulation light/dark give me same result. Same copy when I printing or copying.
5870.pdf

First page is OK
Second is light
and PG test


Im clean complete device, replaced ATR sensor, Change ITB but problem is same. All conectors is OK and HV also. Please some advice ? Tnx