If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Cannot print from mp tray when selected, defaults to cassette 1. Copy works ok. On user data list (auto cass. Select) printer shows only cassette 1 all others show both mp tray and cassette. Any suggestions thanks
Try to reload the print driver on the computer. Make sure you have the proper Print Driver for the computers operating system. Then it should show the correct options for the copier
Comment